No Hot Water? Usual Causes & Tips to Deal with Yourself
No Hot Water? Usual Causes & Tips to Deal with Yourself
Blog Article
Just how do you actually feel on the subject of What Would Cause My Electric Water Heater to Stop Working??
Several modern-day residences take advantage of an electrical hot water heater for their heating unit, because of its benefit as well as simplicity of use. Nevertheless, much like any other electric home appliances, issues might develop with its use, suddenly. It can be truly discouraging to get up to a chilly shower rather than a warm one or having your bath with water that isn't hot sufficient and even too hot. Whatever the case may be, hot water heater troubles can be fairly stressful. Thankfully, we've made a checklist of feasible services to your water heater issues. There are a variety of aspects that could cause most of these issues, maybe a problem with the power supply, the electric heating element, or the thermostat. Prior to doing anything, ensure you shut off the major power supply for security. Whatever the trouble is, getting it repaired need to not position way too much of an issue if you follow these actions:
Call A Professional:
If after changing all faulty components as well as resetting your temperature, the hot water heater still isn't working, you might need to speak to an expert plumber for a specialist point of view. The problem with your heating system could be that the cold and hot taps have actually been switched or it might be undersized for the amount of warm water needed in your house. Whatever the situation might be, an expert plumber would certainly assist solve the problem.
Examine Your Power Supply:
As fundamental as this may seem, it is really needed. Without appropriate power, your water heater will not operate. So the first thing to do when your water unexpectedly stops working is to validate that it isn't a power issue. Inspect if the fuse is blown out or the circuit breaker stumbled. If the breaker is the problem, just turn it off and on again. Change any kind of busted or damaged fuse. Examine the device with power after these adjustments to see if it's currently working.
Inspect Your Thermostat:
If your water heater still isn't working or the water coming out isn't warm sufficient, you might require to examine the temperature level settings on your upper thermostat. Ensure the circuit breaker is switched off before doing anything. Open the access panel and press the red button for temperature reset above the thermostat. This should assist warm the water. Transform the breaker back on and check if the problem has been fixed.
Inspect the Burner in the Hot Water Heater:
If it's not a power trouble, after that attempt taking a look at your burner if it is still functioning. Test each of your heating elements to make sure the issue isn't with any one of them. If any one of them is damaged, replace that part and after that inspect whether the hot water is back on.
Conclusion
Water heater issues are not always significant. Much of them result from minor issues like a blown fuse or worn-out heating element. Replacing the malfunctioning parts should do the trick. Nevertheless, if you are still not able to address the problem, give a call to your closest plumber to find to get it dealt with.
Common Reasons Why Your Hot Water Heater Isn’t Working
Water Gets Too Hot
Ouch! You wanted a hot shower, not boiling! If you have a newer model electric water heater, your water heater works with a thermostat (actually, two thermostats). If this thermostat has been jostled — or purposely reset — by someone in your home, the water flow will be much hotter than you expected.
FIX: Adjust the thermostat to a more moderate setting for producing hot water. Forty-nine degrees Celsius is recommended to prevent scalding.
Water Doesn’t Get Hot
This is the opposite of the previous problem, but it’s almost as bad. Your flow of hot water is merely lukewarm or even incoming cold water. Once again, an incorrect thermostat setting, or a faulty thermocouple in a gas water heater, could be to blame. Another explanation might be that there’s no power to the water heater (in the case of an electric heater) or the pilot light has gone out (if you have a gas unit).
FIX: Adjust your thermostat as necessary. If that doesn’t do the trick, check the power supply. Another possibility is the replacement of a damaged thermocouple in gas water heaters.
Leaking Water Heater
A leaking water heater (a sign may be low hot water pressure, or not enough hot water to shower) might be a reason to push the panic button… but first, take a few minutes to check where the leakage is coming from. Leaks near the top of the heater tend to indicate a problem with a valve, which won’t need a major repair. However, a leak from the water heater base is more serious.
FIX: You may need a qualified plumber to replace your drain valve or TPR (temperature pressure relief) valve. When your water heater is leaking from below, your plumber might be able to fix it if you call them soon enough. Otherwise, you will need to have a new water heater installed.
Noisy Water Heater
Sometimes your water heater might make some peculiar noises, loud enough to compete with your singing in the shower. Are these a cause for alarm? It depends on exactly what kind of sounds you are hearing. Sizzles and rumbles are both red flags, indicating a heavy sediment buildup in your hot water tank that might cause a breakdown in the near future. In addition, banging is a sign of a water hammer, which can lead to serious damage to your pipes.
FIX: To stop sizzling or rumbling, turn off the tank and have it flushed by a reliable plumbing company ASAP. Ask your plumber to install a water hammer arrestor to quiet down the banging and save the pipes.
Pilot Light Keeps Going Out
Many pilot lights go out once in a while, but when your water heater pilot light keeps going out continually, it’s a problem. And the chances are good that that problem stems from either a shortage of combustible air or a malfunctioning thermocouple.
FIX: Increase the air supply around your water heater by cleaning dust and lint off the appliance and clearing any clutter from the area around it. A bad thermocouple will require expert plumbing repair and is more than basic gas water heater troubleshooting.
Water Smells Bad
The water from your residential plumbing pipes should smell neutral. If it has a strong unpleasant odour, something’s wrong. To check whether your water heater is at fault, turn on a hot water faucet and let it run for a few minutes. And, yes, use your nose to determine exactly what you are smelling.
FIX: For a garlicky odour, relight the pilot light on your water tank. When you detect the scent of garbage, you’ll need a professional plumber to flush the hot water tank and possibly replace the anode rod. A strong smell of rotten eggs could signal a hazardous gas leak; turn off the gas supply if possible, get everyone out of your house, and make an emergency call to the gas company.
Water Looks Brown Or Rusted
The first thing to do is ask yourself, “Is the brown, rusty-looking water coming only from my hot water taps?” If the answer is yes, then most likely, either the anode rod or the water heater interior is starting to rust, especially if your hot water heater is nearing the end of its life expectancy. (A “no” answer means the issue does not originate from the hot water heater but rather from the water supply.)
FIX: Contact a plumber to inspect the water heater. If you catch the problem quickly enough, it might be fixable. Otherwise, you’ll need a water heater replacement. Consider installation of an efficient new tankless water heater.
https://www.huskyair.com/blog/hot-water-heater-isnt-working/
Do you enjoy reading up on No Hot Water — Water Heater Repair? Write a review directly below. We'd be interested to listen to your reactions about this blog post. We are looking forward that you come back again in the near future. Sharing is caring. Helping people is fun. Thanks so much for your time invested reading it.
Book Now!
Report this page